Goldring 2400


Increased resolution is gained by the use of the low mass Vital diamond in tapered cantilever. The 2400 Cartridge has a metal body which improves bass power and clarity, this also ensures a secure connection to the arm.

To ensure a cartridge reproduces an accurate transcription of the record groove, the cartridge components must be rigidly mounted to the tonearm, whilst simultaneously allowing the tiniest movements of the diamond stylus to be transmitted, via the cantilever, to the sensing coils. The Legacy boasts an ultra low resonance magnesium metal body which is both very light and extremely strong. For convenience and rigidity, it has threaded inserts allowing the cartridge to be easily mounted and accurately aligned into the headshell.

The stylus is a very low mass ‘Vital’ fine line diamond, which is highly polished and gives extremely low distortion. To maintain rigidity, this is attached to a hard alloy cantilever which transfers the maximum level of detail from the diamond to the coils; the latter are hand wound using only the highest purity copper. To achieve the optimum compliance required to deliver a smooth, extended frequency response, the stylus damper is formed from a bespoke rubber mixture. Lastly, a precision, rare earth, Neodymium iron boron magnet helps deliver outstanding dynamics.

Transducer Characteristics

Frequency response: 20Hz - 22kHz +/-3dB
Channel balance: 1dB max. at 1kHz
Channel separation: 25dB min. at 1kHz
Sensitivity: 0.25mV ± 1dB @ 1kHz
Static compliance: 16mm/N Vertical tracking angle: 20°
Stylus radius: Vital fine line
Stylus type: Non-replaceable

Electrical Characteristics

Load resistance: 100ΩΩ
Load capacitance: 100 - 1000pF Internal inductance: 3 µH
Internal resistance: 7ohms

Mechanical Characteristics

Cartridge weight: 8g
Fixing centres: 0.5in (12.7mm)
Playing weight: 1.5g - 2.Og (1.75g nom)


  • Available in 12 different heights
  • Full range of accessories to cover most eventualities
  • Built to last – made from heavy gauge mild steel
  • Custom made fascia plates to fit most equipment available to order
  • Flat-pack for easy storage and transportation
  • Durable epoxy powder coat finish
  • Manufactured in the UK to BS standards (BS5495 and IEC297)