Systemline S6.2

Audio Connections: Audio Connections: Direct inputs: Stereo analogue in RCA
X 6; Looping source outputs: Stereo 3.5mm jack x 6 (one for each source); Local
inputs: RJ45 from Cat5 cables x 8 (one from each zone)
Pre-outs: Stereo analogue out RCA x 8 (one for each zone)
Direct source: Frequency response: 20Hz - 20kHz +/- 0.1dB; THD + N: <0.03%
@ 1kHz 0dB; S/N ratio > 95dB
Control inputs: Keypads: KPM7, LKPM7 on RJ45 x 8 (one from each zone),
monochrome and colour touch screens
Ethernet: RJ45 10/100 Mb/s standard Ethernet link
Link: RJ45 to synchronise two S6.2 units
Video matrix switch: 9 way D-type RS232 control for supported video
matrix switches
IR emitter output: 3.5mm jack x 6 (one per source), 3.5mm jack x 2 for
global use
RS232 I/O ports: 9 way D-types x 6
RS232 Control: 9 way D-type for external 3rd party control of each audio zone
(does not pass through RS232 from I/O ports)
Front panel display: LEDs showing status of each zone, LEDs showing signal
activity of audio matrix and zone preamp, LEDs showing signal activity of touch
screens and RS232 control
Power supply: 120-240V 47/63Hz selectable via rear panel switch
Power consumption: 150W Max.
Dimensions WxHxD: 438 x 140 x 342mm (17.25 x 5.5 x 13.5")
Weight: 11.0kg (24.2lbs)

• S6.2 distributes 6 sources to 8 zones (expandable to 16 using two units).
  
• There are several control options for each zone, colour TouchScreen, KPM7, LKPM7 and wireless Commander. A zone can have wireless control only, or used with any in wall keypad.
  
• A wireless TouchScreen completely replicates the wired panel but allows you to control any zone without moving.
  
• Each zone can have a local input via one Cat5 cable, this also allows S6.2 to control a local source via IR such as a TV
  S6.2 has 6 configurable RS232 serial ports which can be used for supported RS232 devices such as Arcam T32 DAB/FM tuner, iPort, Lutron Homeworks etc. A 16 zone S6.2 system then has 12 configurable serial ports, 6 on each unit.
  
• There is a dedicated video matrix RS232 port which can be used with any Kramer matrix or the Armour 4x8 HDMI matrix (SY1000), allowing video switching as well as audio switching to each zone.
  
• Each wired TouchScreen measures the background light so can be dim at night time and be bright during the day. This is completely adjustable and perfect for bedrooms where you can dim down to nothing at night time, all happening automatically
  
• TouchScreens have a neat Sky interface where favourite stations can be listed with colour icons, station name and program name is displayed using the RS232 connection to the Sky box.
  
• There is a unique easy interface with NAD AV receivers, allowing a surround sound zone to be fully controlled using Systemline TouchScreen. IR macros can be used to turn on a display device when selecting a video source from one button press.
  
• S6.2 has a party mode, where one button press can switch on a number of zones, determined by the set up software. All zones can be switched off by pressing and holding a standby key.
  
• All configuration uploads are done using Ethernet, a wired or wireless connection from your PC to S6.2
  
• Each S6.2 unit comes with 6 RS232 serial cables, IR emitters, learning remote control and audio cables.